Message boards : Puzzles and science : YARROW
Message board moderation
Previous · 1 · 2 · 3 · 4
| Author | Message |
|---|---|
Stony666Send message Joined: 30 Sep 26 Posts: 62 Credit: 337,396,796 RAC: 9,119,508 |
Hi, running v15 in an own instance shows in error log looking for a detector (plugged in, switched on, on the main screen) ygmc: a serial port answered <GETVER>> with 0 bytes instead of 14 (not a GQ GMC counter, or the baud rate is wrong) ygmc: found GMC-300Re 4.54, calibration 153.85 counts per minute for 1 uSv/h found: GQ GMC counter detector lost found: GQ GMC counter detector lost found: GQ GMC counter detector lost found: GQ GMC counter detector lost found: GQ GMC counter detector lost found: GQ GMC counter detector lost |
VatoSend message Joined: 28 Sep 26 Posts: 10 Credit: 22,583,642 RAC: 412,951 |
i now get this, and v15 is still running after 10+ minutes! looking for a detector (plugged in, switched on, on the main screen) yhid: /dev/hidraw3: 04d8:f6fe yhid: 4 hidraw device(s) present, none matched 16c0:05df this scan found: Radioactive@Home counter |
|
72 years old Send message Joined: 30 Sep 26 Posts: 73 Credit: 214,234,614 RAC: 5,206,239 |
With v0.15 on RPi5 with R@H-Sensor this stderr.txt: looking for a detector (plugged in, switched on, on the main screen) found: Radioactive@Home counter detector lost rah: a device with the Radioactive@Home id answered, but it does not behave like the counter (timer +0 ms in 0 ms of host time, pulses +0); not used found: Radioactive@Home counter detector lost found: Radioactive@Home counter detector lost found: Radioactive@Home counter detector lost found: Radioactive@Home counter detector lost found: Radioactive@Home counter detector lost |
dskagcommunity46 years old Send message Joined: 29 Sep 26 Posts: 64 Credit: 21,977,371 RAC: 136,334 |
Why on Radioation map the points are flying away after zooming in. Its very difficult to see some spots in europa anyhow closer. After my sensor finally seems to work i wanted to watch it a bit ^^ And second, i dont want to open an extra thread for it: it seems the badges are again not getting updated. ---------- 24/7 Crunching since 2011 ----------- DSKAG Austria: http://www.dskag.at
|
|
Send message Joined: 29 Oct 26 Posts: 4 Credit: 189,483 RAC: 4,446 |
I have Yarrow running on WIN 11 machine with a Radioactive@home sensor. The stderr.txt file on Radioactive@home showed the upload values so you could see if it was running correctly. It also showed the errors. The stderr.txt on here just says "found: Radioactive@Home counter". I found that the sensor was returning data but no credit as yet. When is the credit added, as the task seems to have a long run time till finished as it is just over 5% after 2.5 hours. I also kept getting the line in BOINC Manager "14735 bitboinc 01-Nov-26 19:42:13 Message from server: No usable WSL distros found" Do I need to have wsl window open to use ant of the sub projects and if so which ones ?? The BIG Problem is I have "Radiation monitor: buzzer (beep) off" in my Preferences but it is still beeping every few seconds. This is a deal breaker if this can't be fixed I will be turning them off. It is driving me nyts |
|
72 years old Send message Joined: 30 Sep 26 Posts: 73 Credit: 214,234,614 RAC: 5,206,239 |
In reply to Dingo's message of 1 Nov 2026: I have Yarrow running on WIN 11 machine with a Radioactive@home sensor. The stderr.txt file on Radioactive@home showed the upload values so you could see if it was running correctly. It also showed the errors. The stderr.txt on here just says "found: Radioactive@Home counter". I found that the sensor was returning data but no credit as yet. When is the credit added, as the task seems to have a long run time till finished as it is just over 5% after 2.5 hours. Your detector is show on the map. Credit is granted about a day after the data arrived, when the bins have been checked. |
dskagcommunity46 years old Send message Joined: 29 Sep 26 Posts: 64 Credit: 21,977,371 RAC: 136,334 |
tommorow i will reactivade again another R@H sensor, and i think i remember it right that beep stops when hold the button while powerup or..hold it while power was already there does not beep...That was a lucky found only testing arout to kill the beep. But the problem was app was to early or something and i didnt know if it works reading values. I will report more tommorow because yes..this is a absolute dealbreaker. My values now are from the sensor at home but it runs here on Enterprise equipment so there was no powerdown since R@H Project died, so its beep is still silenced from the original project xD But i want to change Bitboinc to get the sensor witch is just 1km away from a research nuclear reactor so i will try hard to find a solution ^^ ---------- 24/7 Crunching since 2011 ----------- DSKAG Austria: http://www.dskag.at
|
|
Send message Joined: 29 Oct 26 Posts: 4 Credit: 189,483 RAC: 4,446 |
In reply to dskagcommunity's message of 1 Nov 2026: tommorow i will reactivade again another R@H sensor, and i think i remember it right that beep stops when hold the button while powerup or..hold it while power was already there does not beep...That was a lucky found only testing arout to kill the beep. But the problem was app was to early or something and i didnt know if it works reading values. I will report more tommorow because yes..this is a absolute dealbreaker. My values now are from the sensor at home but it runs here on Enterprise equipment so there was no powerdown since R@H Project died, so its beep is still silenced from the original project xD My sensor does not have a button it just plugs into USB port. On RA@H the beep stopped after it transmitted so I thought something was sent back from RA or the preferences were read or something.? Not sure but the Beep is not good. I will turn off at bed time for sure. |
dskagcommunity46 years old Send message Joined: 29 Sep 26 Posts: 64 Credit: 21,977,371 RAC: 136,334 |
Oh...thats sad....must be another revision...i have a button next to the outgoing USB Cable. ---------- 24/7 Crunching since 2011 ----------- DSKAG Austria: http://www.dskag.at
|
Stony666Send message Joined: 30 Sep 26 Posts: 62 Credit: 337,396,796 RAC: 9,119,508 |
Hi, one question. Is the problem solved that the yarrow app stops working if another WU is running in boinc? I have the yarrow WU in its own instance of boinc with nothing else running. In the other Instance bitboinc is running with thermopsis an WuProp. Exactly after 4:59min the yarrow WU stops. Somebody can give me a hint to solve that? |
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
Although the application isn't processor-based, the BOINC client assigns a processor to it. I can't understand why this is happening or what's causing this behavior. There's probably a problem with the BOINC client, because the server configuration is the same as in the BOINC documentation.
|
Stony666Send message Joined: 30 Sep 26 Posts: 62 Credit: 337,396,796 RAC: 9,119,508 |
What I have found out when enabling cpu_shed_debug in cc_config.xml was that no detector was found... Having a look here https://yarrow.athena.org.tr/#linux was the step I did to see the detector. No more missing detector messages until now! In the boinc setting of my client I changed the switch between tasks from 60min to 2880min. Atm yarrow is running in its own Instance without interacting with the other instance. Runtime 25min. :) |
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
I've released a new version. It should address these issues better.
|
|
Send message Joined: 29 Oct 26 Posts: 4 Credit: 189,483 RAC: 4,446 |
The Beeping continues with the new app. Still getting the Message from server: No usable WSL distros found Do I need to install and have WSL open ?? 1-Bundy3 1-Bundy3 18776 bitboinc 02-Nov-26 12:32:03 update requested by user 18777 bitboinc 02-Nov-26 12:32:39 Sending scheduler request: Requested by user. 18778 bitboinc 02-Nov-26 12:32:39 Reporting 1 completed tasks 18779 bitboinc 02-Nov-26 12:32:39 Not requesting tasks: don't need (CPU: job cache full; NVIDIA GPU: blocked by project preferences) 18780 bitboinc 02-Nov-26 12:32:40 Scheduler request completed 18781 bitboinc 02-Nov-26 12:32:40 Project requested delay of 31 seconds 18782 bitboinc 02-Nov-26 12:32:42 Started download of yarrow_v21_windows_x86_64.exe 18783 bitboinc 02-Nov-26 12:32:44 Finished download of yarrow_v21_windows_x86_64.exe (3073397 bytes) 18784 bitboinc 02-Nov-26 12:32:45 Starting task yarrow_1793582702_0_0 18793 bitboinc 02-Nov-26 12:35:45 Sending scheduler request: To fetch work. 18794 bitboinc 02-Nov-26 12:35:45 Requesting new tasks for CPU 18795 bitboinc 02-Nov-26 12:35:46 Scheduler request completed: got 0 new tasks 18796 bitboinc 02-Nov-26 12:35:46 No tasks sent 18797 bitboinc 02-Nov-26 12:35:46 No tasks are available for Yarrow (radiation monitor) 18798 bitboinc 02-Nov-26 12:35:46 Message from server: No usable WSL distros found 18799 bitboinc 02-Nov-26 12:35:46 Tasks for NVIDIA GPU are available, but your preferences are set to not accept them 18800 bitboinc 02-Nov-26 12:35:46 Tasks for AMD/ATI GPU are available, but your preferences are set to not accept them 18801 bitboinc 02-Nov-26 12:35:46 Tasks for Intel GPU are available, but your preferences are set to not accept them 18802 bitboinc 02-Nov-26 12:35:46 Tasks for Apple GPU are available, but your preferences are set to not accept them 18803 bitboinc 02-Nov-26 12:35:46 Project requested delay of 31 seconds |
dskagcommunity46 years old Send message Joined: 29 Sep 26 Posts: 64 Credit: 21,977,371 RAC: 136,334 |
Soo i reatcivaded my R@H Detecor near reactor in here, and it works without beeping. This time i THINK without buttonmasching. But im not 100% sure because i was nervous again cos its so loud in here and hit it few seconds after WU start but this time it didnt reacted to it so it perhaps was short enough or needs to be hit while startup. From what Batch your detecor was? Or did you have a kit? ---------- 24/7 Crunching since 2011 ----------- DSKAG Austria: http://www.dskag.at
|
dskagcommunity46 years old Send message Joined: 29 Sep 26 Posts: 64 Credit: 21,977,371 RAC: 136,334 |
Oh and a followup question now: is it possible to see if the newly connected R@H detector gives out values to Botboinc server when another one is active right now? Or do i have to disable the other one and hope the "newly" works when bins still counting up? Edit: mh my median for vienna lowerd a bit since 2hours..so could be that it works. ---------- 24/7 Crunching since 2011 ----------- DSKAG Austria: http://www.dskag.at
|
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
Yes, you can keep both running. Each detector is registered as its own device, and both of yours are sending data right now (last data from both at 17:30 UTC today). Neither is rejected. No need to disable the other one. To see which one is working: open your computers list on the website and check the Yarrow device entries, or look at stderr.txt of the running task, which prints the counts it reads. One note: both devices are in Vienna, so they contribute to the same city median. The median can move a bit when a second sensor starts, that is normal. About the beep: v21 switches the buzzer off on the PIC type of detector when it starts. For the older V-USB type without a software switch, holding the button as you describe is still the way. Thank you for testing and reporting.
|
|
Send message Joined: 29 Oct 26 Posts: 4 Credit: 189,483 RAC: 4,446 |
In reply to Alperen Yavuz's message of 2 Nov 2026:
What about the BEEP on the RA@Home detectors, purchased complete not as a kit, that do not have a button. They just plug into a USB and are detected ?? I had to turn mine off due to the constant beeping. |
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
I will ban you from the forum for promoting a clone project here.
|
|
Send message Joined: 7 Oct 26 Posts: 11 Credit: 6,000 RAC: 17 |
RA@Home = Radioactive @ Home. The project that ended already and offered some detectors that worked with that project. |