Message boards : Puzzles and science : YARROW
Message board moderation
| Author | Message |
|---|---|
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
☢️ Yarrow: a live map of natural background radiation, built from volunteers' Geiger counters ☢️ Yarrow is the newest project on bitboinc, and it is a little different from the others: it does not crunch numbers for you, it measures something. You plug a Geiger counter into your computer, BOINC reads it, and every ten minutes a count of real radiation events goes to the server. Together the counts become a live, open map of the natural background dose rate, city by city, around the world. Here is what it does, how it keeps the data honest, and how to join. 🌍 What is background radiation, and why map it? Everywhere on Earth, all the time, a little ionizing radiation passes through you: gamma rays from uranium, thorium and potassium in rocks and soil, from the building you sit in, radon in the air, and cosmic rays from space. It is harmless at these levels, and it is different from place to place:
curl -fsSL https://raw.githubusercontent.com/alplix/yarrow/main/linux/yarrow-linux-setup.sh | sudo sh sudo systemctl restart boinc-client Then unplug the counter and plug it in again. Works the same on Raspberry Pi OS.
|
rilianSend message Joined: 28 Sep 26 Posts: 261 Credit: 43,482,494 RAC: 474,864 |
|
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
In reply to rilian's message of 19 Oct 2026: > Tell us which one you own. Yes, I will need to research all devices of this type and compile a list. Essentially, we need devices that provide raw data via a USB serial connection.
|
|
Send message Joined: 28 Sep 26 Posts: 14 Credit: 20,206,102 RAC: 1,209,795 |
Multiple users have a GQ GMC-300S (or other variants) from the time when Radioactive@Home was active. The custom app_info made to work that Geiger counter manufacture needed to have a port ID (which USB port) pass along to it once plugged in. Will that be needed with Yarrow? A FNIRSI GC-01 is a cheaper version. Would that work? |
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
All models supported by Rad Pro should work in theory; they are exactly the same. I am currently integrating the components used for radioactive@home into the code. I am trying to implement a fully plug-and-play, auto-detection method. I could also create a custom operating system for the FNIRSI GC-01; however, since there are two different models, I would need to develop two separate versions depending on which one comes in the box. The same model uses two different chips. GC-01, GC-02, GC-03 using same tube. GC-02 is good model but not supporting usb serial and firmware update etc.
|
|
Send message Joined: 28 Sep 26 Posts: 14 Credit: 20,206,102 RAC: 1,209,795 |
Some tasks downloaded. Is there a benefit to running more than 1 task at once? It's set to have BOINC allocate 1 whole thread to it. Will this be updated to an NCI app so it can run alongside a full allotment of CPU threads? Example: a CPU has 8 threads so it could run 8 CPU tasks plus an NCI Yarrow task. Like Radioactive/WUProp and the couple of other monitoring/non computation projects in the past. Edit: Well the progress bar is only progressing on one task and the 1st one is very slowly progressing past 10 min run time. |
rilianSend message Joined: 28 Sep 26 Posts: 261 Credit: 43,482,494 RAC: 474,864 |
|
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
This trick will not work; the application reads raw data directly from the device—such as tube voltage, battery information, battery voltage, etc.—and all tasks are initially marked as invalid. Once a day has passed, the algorithm compares the data across two days; only then are they validated and points awarded.
|
|
Send message Joined: 28 Sep 26 Posts: 14 Credit: 20,206,102 RAC: 1,209,795 |
I noticed a bit later that the two running tasks are v 0.05 and 0.06. Maybe thats why they are running concurrently. Sadly, that was kind of allowed at radioactive and people ran dozens of clients w/o even having a device to gain WUProp hours and having zero credit at radioactive. Status 99.96 % after 23min Edit: It reached 100% around 30 min and is still running at 33 min. |
NichanSend message Joined: 6 Oct 26 Posts: 16 Credit: 2,177,741 RAC: 56,607 |
Just wanted to let you know that a task was triggered for me, even though I don't have a detector. |
OffDutyTaoist46 years old Send message Joined: 19 Oct 26 Posts: 2 Credit: 94,725 RAC: 1,462 |
I keep getting assigned tasks for this as well. I have it disabled through the settings, but the scheduler keeps grabbing tasks for it. |
|
Send message Joined: 7 Oct 26 Posts: 11 Credit: 6,000 RAC: 17 |
Do you have this option as yes? If no work for selected applications is available, accept work from other applications? |
OffDutyTaoist46 years old Send message Joined: 19 Oct 26 Posts: 2 Credit: 94,725 RAC: 1,462 |
For some reason my account_bitboinc.xml was not updating with the check boxes in the project settings. I made sure YARROW was disabled project side in settings, went into the account_bitboinc.xml and deleted <app_id>16</app_id> from the apps_selected section of the project_specific section. After that, I haven't seen another YARROW task. It might be voodoo, it might Maybelline, but it seems to be working as of now. |
|
Send message Joined: 29 Sep 26 Posts: 4 Credit: 32,109,742 RAC: 166,702 |
My GMC-300E+V4Re is not detected (yet?) |
rilianSend message Joined: 28 Sep 26 Posts: 261 Credit: 43,482,494 RAC: 474,864 |
i think there is an issue with yarrow tasks i've got few on different computers yesterday even on those that has no radioactivity monitoring devices name: yarrow_1792502405_0_0 WU name: yarrow_1792502405_0 project URL: https://bitboinc.athena.org.tr/ received: Tue Oct 20 13:23:02 2026 report deadline: Wed Oct 20 13:23:01 2027 ready to report: no state: downloaded scheduler state: preempted active_task_state: UNINITIALIZED app version num: 7 resources: 1 CPU estimated CPU time remaining: 0.000000 elapsed task time: 0.000000 slot: 32 PID: 5348 CPU time at last checkpoint: 0.000000 current CPU time: 0.000000 fraction done: 0.000000 swap size: 0 MB working set size: 0 MB My computer has 32 cores, and preferences had max tasks = 32 (by the way this is the max value, maybe it will be helpful to allow more) because i did not want to have any buffer for testing purposes because yarrow took 1 "max cpus" slot, my computer had 1 core idle this is an interesting situation that usually never happen as there are no other projects with cpu and non-cpu apps at one time i think this project's tasks must be clearly marked non-CPU and should not count towards the max cpus limit setting. Also deadline of 1 year seems too big for me I crunch for Ukraine
|
dskagcommunity46 years old Send message Joined: 29 Sep 26 Posts: 64 Credit: 21,977,371 RAC: 136,334 |
Before i test it with my multiple radioactive@home sensors, its absolutly nessecary they dont peep. Does anybody using them right now and can say something about that? Plus..the project needs multiple sensor per User support in the future, i have two of them, on different locations ^^ (one close (500-1000m?) to a 250kW research Reactor) and the second 10km away :3 So i can measure the inner and the outer exposionring of that thing (in case it would be faulty we never hope it happends) ^^ ---------- 24/7 Crunching since 2011 ----------- DSKAG Austria: http://www.dskag.at
|
|
Send message Joined: 7 Oct 26 Posts: 11 Credit: 6,000 RAC: 17 |
Yarrow is not setup as an NCI app. It could be basically forced with an app_config and ncpus. |
|
Send message Joined: 1 Oct 26 Posts: 8 Credit: 203,623 RAC: 786 |
In reply to dskagcommunity's message of 22 Oct 2026: Before i test it with my multiple radioactive@home sensors, its absolutly nessecary they dont peep. Does anybody using them right now and can say something about that? Yeah, I tried to connect my old Radioactive@Home sensor for several hours, but turned it off. First, because of constant beeping and second, because it not appears on map and not reporting hours, so looks like it not working with Yarrow correctly. One more suggestion from me - tasks need to be NCI, now I have 1 core idle, when Yarrow is working. |
|
25 years old Send message Joined: 27 Sep 26 Posts: 349 Credit: 5,210,013 RAC: 137,017 |
I do not have the source code for these devices. The source code is required to resolve this beeping issue and others.
|
|
72 years old Send message Joined: 30 Sep 26 Posts: 73 Credit: 214,207,614 RAC: 5,206,790 |
In reply to Alperen Yavuz's message of 22 Oct 2026: I do not have the source code for these devices. The source code is required to resolve this beeping issue and others. Try this: https://web.archive.org/web/20161030162704/http://radioactiveathome.org/files/application-sources.zip |